Table of Contents
Advertisement
-
"Performing a Sequential Verification Operation on the Right Side of an
Expression" (page 61)
Example Verify Operation
Example 10:
To determine whether i
1. To enable Verify, press
• An
indicator appears at the top of the screen to indicate that Verify
has been enabled.
2
2. Input i
= -1 and determine if it is true.
3. To disable Verify and exit the Verify operation, press
[Verify OFF].
• This causes the
• For information about how to disable Verify, see
(page
60).
Vector Calculations
Use the Vector app to perform two-dimensional and three-dimensional
vector calculations.
General Procedure for Performing a Vector
Calculation
To perform a vector calculation, use the special vector variables (VctA,
VctB, VctC, VctD) as shown in the example below.
Example 1:
To calculate (1, 2) + (3, 4)
• When performing addition or subtraction of two vectors, they both must
have the same dimensions.
1. Press
, select the Vector app icon, and then press
• This displays the vector calculation screen.
2. Press
.
• This displays the vector variable list screen.
2
= -1 is true
and then select [Verify ON].
(=)
((-))1
indicator to disappear from the screen.
95
(i)
and then select
"To disable Verify"
.
Advertisement
Table of Contents
