Casio fx-8200 AU User Manual page 45

Example: Transform the value 1234 to engineering notation, shifting the
decimal mark to the right, and then to the left.
1. Input 1234, and then press
2. Perform the operation below to enter the ENG Conversion Mode.
• Entering the ENG Conversion Mode converts the calculation result to
engineering notation and causes
• In the ENG Conversion Mode, you can use
decimal point of the mantissa.
3. To exit the ENG Conversion Mode, press
• This exits the ENG Conversion Mode and causes
the display.
• You can also exit the ENG Conversion Mode by pressing
Note
• Normal calculations are not possible while in the ENG Conversion Mode. To start a
new calculation, exit the ENG Conversion Mode.
.
– [ENG Notation]
to appear to its right.
and
.
44
to shift the
to disappear from
or .