Advertisement
SETUP
1. Set out guide pipes
Click together the cross bar
and place on the ground,
then insert the guide pipes
at each end.
2. Assemble the frame
A. Screw together the upright
poles and place in the guide
pipes with spike at the top.
B. Place each end of the cross
bar over the spikes.
3. Set out the pegs
A. Take three big steps back
from the upright pole and
one big step away from the
pole to make an L shape.
B. Hammer in the pegs. Use
sand pegs at the beach and
metal pegs at the park or in
your backyard (hammer
not included).
Advertisement
