Table of Contents
Advertisement
Icon Menu and
Submenus
Screen
Partition (DP/
USB-C)
56
|
Operating the monitor
Description
Screen Partition Modes Native Timing:
1920 x 2160 @ 60 Hz (x2)
Mode 1:
3840 x 1080 @ 60 Hz (x2)
Mode 2:
1280 x 2160 @ 60 Hz (x3)
Mode 3:
Left: 1920 x 1080 @ 60 Hz (x2),
Mode 4:
Right: 1920 x 2160 @ 60 Hz (x1)
Left: 1920 x 2160 @ 60 Hz (x1),
Mode 5:
Right: 1920 x 1080 @ 60 Hz (x2)
Up: 3840 x 1080 @ 60 Hz (x1),
Mode 6:
Down: 1920 x 1080 @ 60 Hz (x2)
Up: 1920 x 1080 @ 60 Hz (x2),
Mode 7:
Down: 3840 x 1080 @ 60 Hz (x1)
1920 x 1080 @ 60 Hz (x4)
Mode 8:
DP Screen Partition (DP/USB-C*)
Screen Partition (IMST)
modes
NOTE:
* When USB-C 1 port is used as upstream port and Screen
Partition is enabled, "USB-C prioritization" will be grayed out.
Data and network speeds through USB-C 1 will be reduced.
To have optimal front of screen, data and network speeds
when enabling Screen Partition, it is recommended to use
DisplayPort as video input and USB-C (data only) as up-
stream port.
** If the capability and bandwidth of your system's graph-
ics card is sufficient, the monitor can reach a maximum of
4 native timing of active partition windows depending on
the Screen Partition mode that is selected. Otherwise if the
capability and bandwidth of the system's graphics card is
not sufficient, some of the partition windows may not reach
its native timing or may not light up. Please do check the
system's graphics card's capability.
All Windows Native Timing that
can be supported
Yes**
Advertisement
Table of Contents
