Dell UltraSharp 43 4K User Manual page 12

USB-C 2 upstream port
9
(Data only)
USB-C 3 upstream port
10
(Data only)
USB-C 4 upstream port
11
(Data only)
Super speed USB
12
10Gbps (USB 3.2 Gen
2) (3)
13
RJ45 connector
14 Stand lock
12 | About your monitor
Connect to your computer using the USB cable (A
to C or C to C). Once the USB cable is connected,
you can use the USB downstream connectors on the
monitor.
NOTE: Remove the rubber plug when using USB-C
connector.
Connect your USB device. You can use these ports
only after you have connected the USB cable (A to
C or C to C) from the computer to the monitor.
Connect to Internet. You can surf Internet via RJ45
only after you have connected the USB cable (A to
C or C to C) from the computer to the monitor.
Lock the stand to the monitor using a M3 x 6 mm
screw (screw not included).