Periodic maintenance and adjustment
specified torque.
1
Tightening torque:
Air bleed bolt:
2
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
15. Pour the specified coolant into the
3
radiator until it is full.
16. Install the radiator cap.
4
17. Start the engine, let it idle for sev-
eral minutes, and then turn it off.
5
18. Remove the radiator cap to check
the coolant level in the radiator. If
necessary, add sufficient coolant
6
until it reaches the top of the radia-
tor, and then install the radiator
7
cap.
19. Start the engine, and then check
8
the vehicle for coolant leakage. If
coolant is leaking, have a Yamaha
dealer check the cooling system.
9
20. Install the cowling and panel.
10
11
12
Air filter element
The air filter element must be replaced
at the intervals specified in the periodic
maintenance and lubrication chart.
Have a Yamaha dealer replace the air
filter element.
8-17
EAU36765
Checking the engine idling
speed
Check the engine idling speed and, if
necessary, have it corrected by a
Yamaha dealer.
Engine idling speed:
1200–1400 r/min
EAU44735