Yamaha R1 Owner's Manual page 38

Instrument and control functions
TIP
1

TCS can only be turned on or off
via the main screen using the
2
mode switch.

When TCS has been turned off,
3 TCS, SCS, LCS, and LIF will be
set to OFF and cannot be adjust-
ed. When TCS is turned on again,
4
these related-traction control func-
tions will return to their previous
5
setting levels.
6
1
7
TCS
8
2
9
1. System intervention
10
2. Lean angle
11
SCS
SCS can be set to OFF, 1, 2, and 3.
12
OFF turns the slide control system off,
setting level 1 provides the least
amount of system intervention, and set-
ting level 3 provides the greatest
amount of system intervention.
1
SCS
1. System intervention
9
8
7
2. Sideward slide
6
5
4
3
2
1
LCS
LCS can be set to 1, 2, or OFF. Setting
level 2 more strongly controls power
engine output, while setting level 1 ap-
plies less system intervention. OFF dis-
ables the LCS function from the
selected YRC mode (the LCS icon will
not appear and the launch control func-
tion cannot be activated).
When LCS has been set to level 1 or 2
for the selected YRC mode, the LCS in-
dicator on the main screen will appear
in a grey color to indicate that LCS is
5-17
available. When the launch control sys-
tem has been activated (made ready
for use via the mode switch), the LCS
indicator will turn white.
TIP
3
LCS works in conjunction with the LIF
2
1
system. LCS cannot be used if LIF is
turned off.
QSS
2
QSS can be set to 1, 2, or OFF. Setting
level 1 gives the fastest shifts, while
setting level 2 gives slightly smoother
shifts. OFF turns the system off entire-
ly, and the clutch lever must then be
used when making upshifts.
TIP
Turning the QSS on or off does not af-
fect any other systems nor is QSS af-
fected by the settings of any other
system.
LIF
LIF can be set to 1, 2, 3, or OFF. Setting
level 3 most strongly reduces wheel lift,
and setting level 1 provides the least
amount of system intervention. OFF