3.4.1.
Removing a PCIe Blade
Required Tools
None
Procedure
1. Unpack the new component on a clean ESD-protected work surface
2. Open the cabinet rear door
3. Check the PCIe blade status
1. Press the Attention button (C).
2. Check that the LEDs have the following states:
a. Attention LED (A) blinking
b. Power LED (B) blinking
c. Power LED (B) OFF
Important If the power LED (B) blinks and then turns ON, the card
cannot be removed.
Chapter 3.
Servicing Rear Components
3-15