Stopping The Generator; Maintenance - Power smart PS5040 Instruction Manual

STOPPING THE GENERATOR

WARNING:Never stop the engine with electrical devices connected and with the connected
devices turn "ON".
1. Remove all the load on generator.
2. Allow the generator run at no load for a few minutes to stabilize internal temperatures of the engine
and generator.
3. Turn the engine switch to "OFF" position.(See fig.10)
Fig.10
4. Turn the fuel valve to "OFF" position (See fig.11).
Fig.11
5. Remove the plug of all electric equipment from the generator panel (See fig.12).
Fig.12

MAINTENANCE

WARNING: Accidental starts can cause severe injury or death. Remove and ground spark
plug wire before performing any service.
WARNING: The filter element may contains PAHs, PAHs are harmful for your health.
Please wear gloves for protection during air filter maintenance.
17