TIG ASSEMBLY
TIG Welding
Insert the cable plug with the earth clamp into
the "+" socket on the front panel of the welding
machine, and tighten it clockwise.
Insert the cable plug of the TIG torch into the "-"
socket on the front panel of the machine and
tighten clockwise.
Fig 4
A
A
V
V.R.D
U
<24V
0
MMA
TIG
MIG
V
M/MIN
Earth Clamp
Connect the TIG torch control switch into the
torch control outlet plug on the machine front
panel.
Connect the gas hose to the regulator /
flowmeter located on the shield gas cylinder and
connect the other end to the machine (Fig.4).
ON
AC230V
OFF
GAS IN
23
Gas
Hose
TIG Torch