Primary Setup
This page lets you change the LAN (Local Area Network) settings on your WBR-6020 N_Max
Wireless Router and WAN (Wide Area Network) connection.
LAN IP Address: The local IP address of this device. The computers on your network must
use the LAN IP address of your product as their Default Gateway. You can change it if
necessary.
WAN Type: WAN connection type of your ISP. You can use the drop-down men to choose the
most suitable one from the following options:
Connection Control: You can choose the method that the router maintains connection to the
internet.
Connect-on-Demand: The router will automatically connect to the Internet when a
computer in the network requests Internet usage.
Auto-reconnect (always on): The router will maintain connection to the Internet at all
possible times. It will also reconnect automatically when it detects it has been
disconnected.
Manually: You will need to connect to the Internet manually each time
22
Need help?
Do you have a question about the WBR-6020 and is the answer not in the manual?