Mode Screen; Operation - LevelOne WBR-6002 User Manual

Access Point Mode

Mode Screen

Data - Mode Screen
Device
Name
Device
Mode
IP Address
Subnet
Mask

Operation

Operation is automatic.

Wireless clients can connect to the Access Point if they have the correct SSID
and security, but they must obtain an IP address from the DHCP Server on
your LAN.
Note: To use Schedule functions in Access Point mode, please make sure your
NTP settings are working under Router Mode.
This field displays the current name of this device.
Select the desired device mode for the router:

Router - In this mode, this device can provide shared Internet
Access to all your LAN users. Also, by default, it acts a DHCP
Server, providing an IP address and related information to all
Wireless and LAN users.

Access Point - The device links your Wireless Stations to your
wired LAN. The Wireless stations and devices on the wired LAN
are then on the same network, and can communicate with each
other without regard for whether they are connected to the net-
work via a Wireless or wired connection.
After changing the mode, this device will restart, which will take a
few seconds. The menu will also change, depending on the mode
you are in.
The IP Address of this device. Use the default value unless the
address is already in use or your LAN is using a different IP address
range.
The Network Mask associated with the IP Address above.
Mode Screen
101