D-Link DIR-820 User Manual page 92

DIR-820 AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Parameter
Encryption protocol
Authentication
protocol
Keep Alive
Static IP address
PPP debug
Select a method of MPPE encryption.
No encryption: MPPE encryption is not applied.
•
MPPE 40 128 bit: MPPE encryption with a 40-bit or 128-bit
•
key is applied.
MPPE 40 bit: MPPE encryption with a 40-bit key is applied.
•
MPPE 128 bit: MPPE encryption with a 128-bit key is
•
applied.
MPPE encryption can be applied only if the MS-CHAP, MS-
CHAPv2, or AUTO value is selected from the Authentication
protocol drop-down list.
Select a required authentication method from the drop-down list or
leave the AUTO value.
Move the switch to the right if you want the router to
connected to your ISP even when the connection has been inactive
for a specified period of time. If the switch is moved to the right, the
LCP interval and LCP fails fields are available. Specify the
required values.
Fill in the field if you want to use a static IP address to access the
Internet.
Move the switch to the right if you want to log
connection debugging.
Page 92 of 210
Configuring via Web-based Interface
Description
keep you
all data on PPP