D-Link DIR-820 User Manual page 175

DIR-820 AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
To specify URL addresses to which the selected filtering mode will be applied, in the Addresses
section, click the ADD button (
parameters:
Parameter
URL address
Match with template
Click the SAVE button.
To remove a URL address from the list, select the checkbox located to the left of the relevant
address in the table and click the DELETE button (
editing window.
To define devices to which the specified restrictions will be applied, select a needed value from the
Client filtering drop-down list.
Devices from list: When this value is selected, the router applies restrictions only to the
•
devices specified in the Clients section;
All but devices from list: When this value is selected, the router does not apply
•
restrictions to the devices specified in the Clients section, but applies restrictions to other
devices.
To add a client to the list, in the Clients section, click the ADD button (
window, in the MAC address field, enter the MAC address of the device from the LAN. You can
enter the MAC address of a device connected to the router's LAN at the moment. To do this, select
the relevant device from the drop-down list (the field will be filled in automatically) and click the
SAVE button.
To remove a client from the list, select the checkbox located to the left of the relevant rule of the
table and click the DELETE button (
After completing configuration of the URL filter, click the APPLY button.
To set a schedule for the URL filter, click the Set schedule icon (
from the Rule drop-down list, select the Create rule value to create a new schedule
Schedule section, page
Existing schedules are displayed in the Rule name drop-down list.
). In the opened window, you can specify the following
A URL address, a part of URL address, or a keyword.
Select a value from the drop-down list.
Full: The request address should exactly match the value
•
specified in the field above.
Begin: The request address should begin with the value
•
specified in the field above.
End: The request address should end with the value
•
specified in the field above.
Partly: The request address should contain the value
•
specified in the field above in any part of it.
). Also you can remove a client in the editing window.
187) or select the Select an existing one value to use the existing one.
Page 175 of 210
Configuring via Web-based Interface
Description
). Also you can remove an address in the
). In the opened window,
). In the opened
(see the