Table of Contents
Advertisement
DIR-820 AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Parameter
Schedule name
Interval of execution
Duration
Time
Days of week
Day of month
In the advanced mode, you can specify more parameters for the schedule using a cron expression.
To do this, select the Advanced mode value from the Mode drop-down list and specify the
needed values in the fields displayed. You can specify one value or several values separated by a
comma. You can use the character * (asterisk) to specify the entire range of possible values. Upon
that the Schedule field will be filled in automatically. In the Schedule name field, specify a
schedule name for easier identification
You can also use the calendar mode to configure the schedule. To do this, select the Calendar
mode value from the Mode drop-down list. In the Schedule name field, specify a schedule
name for easier identification (you can specify any name). In the table, select cells corresponding to
needed hours and days of the week. To deselect a cell, left-click it once again. To deselect all cells
and select others, click the RESET button and select new cells.
Click the SAVE button.
To edit a schedule, in the All Tasks section, select the relevant line in the table. In the opened
window, change the needed parameters and click the SAVE button.
To remove a schedule, in the All Tasks section, select the checkbox located to the left of the
relevant line in the table and click the DELETE button (
Simplified mode
Specify a schedule name for easier identification. You can specify
any name.
Specify the time period for performing a task.
Every minute.
•
Every hour: When this value is selected, the Time field is
•
displayed in the section.
Every day: When this value is selected, the Time field is
•
displayed in the section.
Every week: When this value is selected, the names of days
•
of the week and the Time field are displayed in the section.
Every month: When this value is selected, the Day of
•
month and Time fields are displayed in the section.
Specify the interval during which the task will be performing.
Specify the time when the task should start running.
Select a day or days of the week when the task will be performing.
To do this, select the checkbox located to the left of the relevant
value.
Specify a day of the month. You can specify one value or several
values separated by a comma.
(you can specify any name).
Page 190 of 210
Configuring via Web-based Interface
Description
).
Advertisement
Table of Contents
