Table of Contents
Advertisement
DIR-820 AC1200 Wave 2 MU-MIMO Wi-Fi Router
User Manual
Parameter
Action
Protocol
IP version
Direction
Set as
Start IPv4 address /
Start IPv6 address
Select an action for the rule.
Allow: Allows packet transmission in accordance with the
•
criteria specified by the rule.
Deny: Denies packet transmission in accordance with the
•
criteria specified by the rule.
A protocol for network packet transmission. Select a value from the
drop-down list.
An IP version to which the rule will be applied. Select the relevant
value from the drop-down list.
The direction of network packet transmission to which the rule will
be applied. Select the source of the packet direction from the
Source drop-down list.
WAN: The rule will be applied to the packets transmitted
•
from the external network.
LAN: The rule will be applied to the packets transmitted
•
from the local network.
Select the destination of the packet direction from the Destination
drop-down list.
Router: The rule will be applied to the packets transmitted
•
to DIR-820.
WAN: The rule will be applied to the packets transmitted to
•
the external network.
LAN: The rule will be applied to the packets transmitted to
•
the local network.
From the Source interface and Destination interface drop-
down lists, select source and destination interfaces for which the rule
will be applied. Leave the Auto values to apply the rule to all
created WAN interfaces.
Source IP address
Select the needed value from the drop-down list.
The source host start IPv4 or IPv6 address.
If it is necessary to specify a single address, leave the End IPv4
address / End IPv6 address field blank.
You can choose a device connected to the router's LAN at the
moment. To do this, select the relevant IPv4 or IPv6 address from
the drop-down list (the field will be filled in automatically).
Page 164 of 210
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
