Table of Contents
Advertisement
Wall Mount Plate Mounting
1.
Follow the steps below to mount the industrial switch with wall mount plate.
2.
Remove the DIN-Rail from the industrial switch; loose the screws to remove the
DIN-Rail.
3.
Place the wall mount plate on the rear panel of the industrial switch.
4.
Use the screws to screw the wall mount plate on the industrial switch.
5.
Use the hook holes at the corners of the wall mount plate to hang the industrial
switch on the wall.
6.
To remove the wall mount plate, reverse steps above.
Screw the wall mount plates on the Industrial Switch
16
Advertisement
Table of Contents
