Omni 3350; Telephone Line Connections; Connection With Electricity - VeriFone Omni 3350 Instruction Manual

Instructions for
VeriFone Omni 3350, 3740 og 3750 terminals

Omni 3350

Omni 3740/3750 terminal from VeriFone enables you to accept following cards:
• MAESTRO
• MASTERCARD
• VISA
• VISA ELECTRON
If you want the terminal to work properly you have to have 240V~ electricity outlet and phone line
(analog). The terminal has internal printer and the accessories that goes with the terminal are electric
cable and phone line cable. You have to plug the terminal with electricity and phone-line before you
start to use your terminal.

Telephone Line Connections

Connection with electricity

debet card
credit card
credit card
debet card
Back Panel: Connect the telephone cord to the
communication port on the terminal (second
from left) then route it directly to a telephone
wall jack. This is a direct connection, and the
line is dedicated to the terminal. (mynd 1)
You can connect phone/fax to the port farthest to
left (but it is not recomended).
If you have ISDN connection you use the port
farthest to left.
Back Panel: Insert the round barrel connector into the power port.
The round barrel connector on the power pack cable has a plastic
lock tab that secures the power cable to the terminal. To lock the
connector into the power port, align the plastic lock tab so it points
up. Insert the connector, and then twist it to the left. To unlock the
connector, twist it to the right. Insert the power cable into the power
pack. Plug the power pack cable into a wall outlet or surge
protector. When the terminal has power, the LCD screen lights and
the green LED indicator flashes on and off if the printer has no
paper, or stays lit if paper is loaded.
On the left side of the terminal is a switch to turn the power on
and off.
It is prefered the terminal is switched on all the time.
The Equipment
(mynd 2).
Page 7 of 33