Specifications - Subaru ER12 Service Manual

1. SPECIFICATIONS

Model
Type
Bore × Stroke
Piston Displacement
Compression Ratio
Maximum Output
Maximum Torque
Direction of Rotation
Valve Arrangement
Cooling System
Lubrication System
Lubricant
Capacity of Lubricant
Carburetor
Fuel
Fuel Supply System
Spark Plug
Starting System
Governor
Air Cleaner system
Dry Weight
Dimensions (L x W x H)
*Specifications are subject to change without notice .
mm (in .)
ml (cu .in .)
kW(HP)/r .p .m .
N ・ m / r .p .m .
(kgf ・ m / r .p .m .)
(ft ・ lb . / r .p .m .)
L (U .S . gal .)
kg (lb .)
264 x 288 x 334 (10.39 x 11.34 x 13.15) : Float type Caburetor
mm (in .)
264 x 288 x 336 (10.39 x 11.34 x 13.23) : Diaphragm type Caburetor
Air-Cooled, 4-Cycle, Single-Cylinder,
Horizontal P.T.O. Shaft, OHC Gasoline Engine
60 × 43 (2.36 × 1.69)
2.6(3.5)/3600
Counterclockwise as viewed from the P.T.O. shaft side
Overhead cam system
Forced air cooling system
Trochoid Pump, Forced and Splash lubrication system
Automotive detergent oil - SAE; #20, #30 or 10W-30
API service class; SE or higher (SG, SH or SJ is recommended)
Horizontal draft, Float type or Diaphragm type
Automobile unleaded gasoline
NGK CR5HSB
Recoil starter
Centrifugal flyweight type
Semi wet type
- 1 -
ER12
121 (7.38)
9.6
7.3/2400
(0.74/2400)
(5.38/2400)
0.35 (0.092)
Gravity type
9.9 (21.78)