Table of Contents
Advertisement
Next, place the Mesh Router into the enclosure:
1.
Lift up the hinged cover of the enclosure.
2.
Slide the Mesh Router into the enclosure from the top.
3.
Close the cover of the enclosure.
4.
Insert the hex screw into the cover's locking portion and tighten it.
5.
The Mesh Router is now ready to use.
Note:The sensor cover on the bottom of the enclosure can be removed so that the filter
and sensor can be inspected without removing the Mesh Router from the enclosure.
Simply pull off the cover and follow the maintenance procedures in this guide.
Mesh Router
68
User Manual
Advertisement
Table of Contents
