Programming The Mesh Router - Honeywell Mesh Router User Manual

CHAPTER
9
Programming Mode is accessed by first providing the correct password.
Press and hold [MODE] and [N/-] until you see this screen:
Input the 4-digit password:
Increase the number from 0 through 9 by pressing [Y/+].
l
Decrease the number from 9 through 0 by pressing [N/-].
l
Step from digit to digit using [MODE].
l
Once all the four digits have been entered, press [MODE] again to see the following screen
appear. Press [Y/+] to enter the password.
Mesh Router

Programming the Mesh Router

31 User Manual