Honeywell Mesh Router User Manual page 50

Wireless range extender and deployment tool

Table of Contents

Now press "Trigger Relays." This screen is now shown:

Trigger all Relays

With "All Relays" highlighted, press [MODE] to trigger all relays simultaneously.

Trigger a Selected Relay

Scroll down the list of relays (1 through 5) by pressing [N/-]. Once you have highlighted

the individual relay you want to trigger, press [MODE]. This triggers only that one

selected relay.

Note:The relay on the TPPLW controller remains triggered until it is cleared, either at the

TPPLW or at the Mesh Router. Also, the word "ONLINE" on the Mesh Router flashes on

and off until you clear the relays.

Clear Relays

Clear relays clears all of the relays on the controller, even if only one relay was triggered.

Select "Clear Relays" and then press [MODE] to clear the relays.

Mesh Router

User Manual

Table of Contents