1 Camera housing
3 Connection thread
5 50.8mm (2") eyepiece holder
9 Using the internal USB HUB (USB 2.0)
The camera is equipped with an built-in USB HUB with 2x USB 2.0 sockets at the rear. This can be
used to connect additional components (e.g. autoguider camera, motor focus etc.). Separate cable
connections of the accessories to the computer are omitted.
NOTICE! The use of short cable connections is recommended to reduce the risk of 'cable spa-
ghetti' and cable breakage.
10 Camera mounting with optional autoguider
Illustration 4: Mounting the Deep Sky Astro Camera with optional autoguider camera
1 Autoguider camera
3 USB 3.0 connecting cable
10 / 28
6
8
10
1
2 Holding thread
4 50.8mm (2") T2 adapter
6 Eyepiece extension
4
1
5
7
2 ST4 connecting cable
4 Guiding scope
11
12
A
13
9
C
2
1
1
B
3