Advertisement
T E C H N I C A L W H I T E PA P E R
CONTENTS &
NAVIGATION
2
HP Thunderbolt Dock G4 specifications summary
HP Thunderbolt G4 Dock, The Dock That
Does It All
3-4
First-time Connection
5-6
Supported Modes (Multi-Function
and Thunderbolt
4/USB4/Thunderbolt
TM
TM
Pre-Boot Support
LED/Power Button
6-9
Charging Support from the Dock
Display Capabilities
9-10
HP Sure Start for Docks
Thunderbolt
Security Levels – Available Functions
TM
and Ports
10-12
Manageability
13-14
Troubleshooting Issues
15-19
Support list for the HP Thunderbolt 4 Dock
HP Commercial Notebook / mWS Platform Support
4.
2. A second dialog opens. See Figure E. Select one of the following options:
• Do Not Connect—prevents the dock from connecting to the notebook.
• Connect Only Once—allows the dock to connect to the notebook until it is disconnected. Each time the dock is
disconnected and reconnected, you must be logged on as an administrator to allow access to the dock.
• Always Connect—allows the dock to connect to the notebook. The dock can connect to the computer automatically
after it is disconnected and reconnected, even if you are not logged on as an administrator.
Figure E: Dialog box to configure connection settings of a new Thunderbolt
3)
3. Select OK. See Figure E above.
If the New Thunderbolt
to relaunch Approved Thunderbolt
1. Right click the Thunderbolt
2. Select Approve Attached Devices
Figure F.
3. Click on the port in which the Thunderbolt
4. The Approve Thunderbolt
dock. See Figure D above.
5. If you miss this dialog box you may reopen it by clicking on the message icon in your system tray. See Figure G.
Figure G: Message icon in system tray.
Devices dialog box (Figure E) is missed or does not pop up from Step 1 above, go to the system tray
TM
Devices.
TM
icon on the system tray
TM
device is connected. See Figure F above.
TM
Devices dialog box should now appear and you will be able to approve your Thunderbolt
TM
device.
TM
TM
Advertisement
