Do not attempt to service this product yourself. Refer all servicing to authorized service centers, should be delivered to an appropriate collection facility for recycling. Proper installers, technicians, dealers or distributors. To contact Bose Professional or to find a dealer or disposal and recycling helps protect natural resources, human health and the distributor near you, visit PRO.BOSE.COM.
Technical Specifications Important Installation Information It is the installer’s responsibility to ensure installation of the loudspeakers For additional specifications, see the DesignMax DM5SE technical and mounting system is performed in accordance with all applicable data sheet at PRO.BOSE.COM. codes, including local building codes and regulations. Consult the local authority having jurisdiction before installing this product.
Euroblock connector. Note: If using the wide open rubber conduit configuration, it is the installer's responsibility to seal against water ingress into the Euroblock connector. 4 • English DesignMax DM5SE • Installation Guide...
Setup PRO.BOSE.COM Wiring the Loudspeaker Wire Gauge The DesignMax DM5SE loudspeaker is designed to work with 18 AWG (0.8 mm ) to 14 AWG (2.1 mm ) size wire only. Connection Diagrams Expose six millimeters (1/4 inch) of bare wire to attach to the terminals.
For outdoor installations, insert the wires through the bottom of the input cover. See Preparing the Weather- resistant Input Cover on page 4. Wire the connector. For wiring information, see Wiring the Loudspeaker on page 5. 6 • English DesignMax DM5SE • Installation Guide...
Note: The angle of the loudspeaker can be adjusted to 0°, 15°, 30°, or 45°. Lock the tabs into place. Press the lock forks onto the lock tabs until the forks sit securely around the tabs. Installation Guide • DesignMax DM5SE English • 7...
Suitable for installation using Class 1, Class 2, Class 3 wiring methods in accordance with NFPA 70, National Electrical Code, 2017, Article 640 The DesignMax DM5SE loudspeaker has been designed to the requirements defined in the following European regulatory specification for combination systems: Tested to IEC60268-5, 2007 8 •...
TECHNICAL DATA DesignMax DM5SE surface-mounted loudspeaker Product Overview With coaxial two-way drivers, the 60-watt DesignMax DM5SE loudspeaker offers rich lows and clear, intelligible highs — along with premium aesthetics that complement any commercial sound installation. The DM5SE features a two-way 5.25-inch woofer and...
Page 13
U-Bracket, powder-coated steel Optional Accessories Pan & Tilt Bracket PRODUCT CODES 829705-0110 DESIGNMAX DM5SE PAIR BLK 829705-0210 DESIGNMAX DM5SE PAIR WHT Footnotes (1) Frequency response and range measured on-axis in half-space environment with Bose EQ voicing (2) Sensitivity measured on-axis in half-space environment averaged 100 Hz – 10 kHz using recommended High-Pass protection (3) Maximum SPL calculated from sensitivity and power handling specifications, exclusive of power compression.
Page 14
DesignMax DM5SE surface-mounted loudspeaker On-Axis Frequency Response Bose EQ Voicing Raw (HPF only) 1000 10000 20000 Frequency (Hz) Impedance 1000 10000 20000 Frequency (Hz) Beamwidth Horizontal Vertical 1000 10000 20000 Frequency (Hz) For additional specifications and application information, please visit PRO.BOSE.COM.
Page 15
DesignMax DM5SE surface-mounted loudspeaker Dimensions For additional specifications and application information, please visit PRO.BOSE.COM. Specifications subject to change without notice. 09/2020 PRO.BOSE.COM OF 4...
Need help?
Do you have a question about the DesignMax DM5SE and is the answer not in the manual?
Questions and answers