Emerson GO USB Logger User Manual page 15

Using the Software (cont'd)
4. Interval settings: Change recording interval and start delay
5. Alert Settings: Change alert parameters
• Enable Alerts: Enables alerts on Logger
• Sound Alert: Enable buzzer on device
6. Alert Type: Change alert type
• Consecutive alert mode
• Cumulative alert mode
7. Button functionality:
• Start + Stop for marked events: Enables marked events to be created
• Disable Stop Functionality: Disables ability to stop logger manually with the Stop button
8. Device Date/Time Settings: Change UTC time to reflect time zone. Software automatically syncs
date to local date
9. Note: Leave a note within the PDF/CSV file which is generated upon connecting to PC
10. Device Information: Static information about logger such as serial number, manufacturing date,
model, and firmware
11. Current Configuration: Displays current configuration of connected logger
12. Device Status Information: Displays summary statistics
13. Buttons
• Synchronize button: Synchronizes current logger configuration to software
• Clear Memory Button: Clears logger memory. Before any new settings can be Configured to
logger, you must first click the "Clear Memory" button
• Stop button: Stops logging (if STOP button is disabled, this is the only way to stop the logger)
• Configure Button: Configures logger based on current selections
• Exit Button: Close software
15