Configuration Software - Emerson GO USB Logger User Manual

Configuration Software

While the all the loggers come pre-configured and ready to use with default settings, the GO USB
loggers are configurable to meet your cold chain needs. If you wish to configure a logger, please
ensure that the product has been stopped and you have transferred reports to your computer. Once
the logger is reconfigured the previous PDF and CSV files will no longer be available.
If you wish to use the logger out of the box, the default factory programming is as follows:
• Recording interval: 5 min
• Alerts setting: Disabled
• Sound alarm: Disabled
• Memory mode: Stop when full
To install the software, visit
the available QR code. Once downloaded, simply extract the .zip
file to a desired location and run the executable file
steps of the installer. Once the installer has finished, navigate
to the installed directory, or program shortcut to launch the
application.
Administrative privileges may be required to install the software. Consult your IT department for
4
assistance.
Using the Software
Connect the logger to a PC. After launching the software,
you will be asked to select a preferred language. Select
the preferred language and click Enter. The software will
now launch.
13
Emerson.com/GOUSBLogger or use
. Follow the
4
Download GO USB
Logger Software