Table of Contents
Advertisement
EN
that any hazardous and potentially threatening condition has been thoroughly
eliminated. If you notice any abnormal condition, stop the machine and immedi-
ately inform staff in charge of maintenance.
- Do not allow unauthorized personnel to perform tasks on the machine. The
emergency procedure to follow, should the machine operator suffer an accident
involving electrically conductive parts, is to first of all pull the operator away from
the power source (since usually the operator loses consciousness in this type of
accident). In this case, the operator is a live conductor: touching him would
mean suffering electrocution. Proceed to disconnect the contacts from the power
line valve or, if this is not possible, draw the victim away with the aid of insulating
materials (wooden clubs or PVC, fabric, leather, etc.,). It is advisable to immedi-
ately request medical staff to intervene and have the patient hospitalized.
- Do not perform any task on the machine if not duly authorized beforehand.
- Follow the procedures established for maintenance and technical assistance.
1.7 - Machine details
The exact description of the "Model", "S erial number" and "Year of manufacture" of
the machine will help our customer service staff provide prompt and efficient an-
swers. Whenever you contact our customer service or request spare parts, always
be sure to provide the above information. We recommend that you fill out the form
in picture 1.7.1. below as a reminder, copying the data of your machine on another
sheet of paper.
Bone saw model...................................................
Serial number.......................................................
Year of manufacture............................................
Type ....................................................................
A = machine model
B = power supply
C = motor power
D = motor frequency (Hz)
E = weight
F = Ampere
G = Year of manufacture
H = Serial number
I = Manufacturer
L = Bar code
1.8 Safety guards and devices
Before you proceed to use the machine, make sure its safety devices are in place
and intact.
Check that they are installed and efficient at the beginning of every work shift. If
they are not, inform the manager in charge of maintenance at once.
1 - Mobile guard installed around blade area.
If there is no piece in the machine, the guard prevents the operator from ac-
cidentally touching the cutting blade. (Picture 1.8.1)
2 - Micro-switch to check housing status (open/closed)
If the housing is open, the micro-switch cuts off electrical power from the
machine, causing it to stop.
Closing the housing allows the machine to resume operation, but the opera-
tor must press the start button again.
!! CAUTION !!
reason whatsoever change the
information displayed on the label.
Fig. 1.7.1
9
Do not for any
A
B
C
D
E
F
G
H
I
L
Advertisement
Table of Contents
