Table of Contents
Advertisement
7. Regulator maintenance
-
The regulator's maintenance consists in cleaning as needed, but at least once a year. Clean the regulator
with a vacuum cleaner or fine dry cloth.
Service
8.
Observe the generally applicable country-specific provisions. In case of any service activity, the regulator
-
must be disconnected from the mains. Any electrical service work must be carried out by a person with
professional qualifications.
Complete the electrical connection precisely according to the supplied electrical documentation. Always
-
assess the suitability of the use of recommended cable connections with respect to the fire zones of the
construction, protective distances, protection and condition of the electrical installation of the
construction.
Connect the prepared cables to the terminals according to the attached electrical documentation, then
-
check the connection before switching on the power supply.
Decommissioning and recycling
9.
All unused or not operable products and packaging should be returned to the
appropriate recycling locations where they will dispose of them in a professional
manner. Please dispose the unusable parts of the product in a controlled landfill.
Only like this the recycled product can be reused and bring a new benefit.
Warranty
10.
We do not guarantee the suitability of using the regulator for special purposes, determination of
-
suitability is fully within the competence of the customer and the designer.
The regulator warranty is valid according to legal regulations.
-
The warranty only applies if all installation and maintenance instructions are followed.
-
The warranty covers manufacturing defects, defects in material or defects in the operation of the
-
instrument.
The warranty does not apply to defects caused by:
-
o improper use or project
o incorrect handling
o during transport (damage caused by transport and its financial compensation must be resolved
with the carrier)
o incorrect assembly
o incorrect electrical connection or protection
o incorrect operation
o by unprofessional intervention in the regulator
o wear and tear in a normal manner
o as a result of a natural disaster
-
When applying the warranty, it is necessary to submit a report (part of this document) containing:
o details of the complaining person/company
o date and number of the sales document
o detail defect description
o wiring diagram and protection data
o photo of the product's manufacturing label and, where appropriate, serial number
o photo from the place of product installation
o product measured values: air temperature, voltage, current
Verze 1 – GBR (11.3.2020)
8
D-502-0168
Advertisement
Table of Contents
