Table of Contents
Advertisement
Terminal clamp for regulator power supply
Description: +10V terminal designed to supply the
regulator at 10VDC
Max. current capacity of regulator: 10 mA
Recommended cross-section of conductors: between 0.5
mm2 and 1.5 mm2.
Select the cross-section according to the length of the
conductor route.
6. Recommended electrical wiring
Verze 1 – GBR (11.3.2020)
EC fan connection terminals
Description: terminals for connecting the control
voltage from the EC fan PWM/0-10VDC (+); GND (-) with
resistance 10kΩ. Regulator control range 2-10VDC. The
minimum control voltage under 2V does not guarantee
the correct functionality of the EC fan.
Contact load: max 0,3mA
Recommended cross-section of conductors: from 0.5
mm
2
to 1.5 mm
2
Select the cross-section according to the
length of the conductor route
7
D-502-0168
Advertisement
Table of Contents
