Table of Contents
Advertisement
Video
Color Temperature
Cool
Normal
Warm
Native
Custom
Noise Reduction*
Adaptive Contrast*
Gamma
Native
2.2
2.4
Ambient Light Sensing
Color Enhance*
HDR Mode
Backlight / Brightness
Contrast
Video Black Level
Sharpness*
Color*
Tint*
Reset Video Settings
*: Such as DVI signals through DVI/HDMI conversion cable, those signals with no InfoFrame information and analog RGB signals are not
supported.
Adjusts the color temperature of the entire screen.
A low color temperature will result in a reddish screen. A high color temperature will make the
screen bluish.
If a temperature needs further adjustment, the individual R/G/B/ levels of the white point can
be adjusted.
High color temperature setting. The screen will be bluish.
Intermediate setting.
Low color temperature setting. The screen will be reddish.
Turns the color temperature adjustment off and displays the image with the panel
characteristics.
Customizable settings.
Reduces the image noise.
Automatically adjusts the contrast according to the image. If [High] is set, the image is shown
clearly but the brightness variation may appear unnatural.
Adjusts the brightness of gray and other intermediate colors. (SDR)
Gamma correction is handled by the LCD panel.
Typical monitor gamma for use with a computer.
Typical gamma settings for use with video devices, such as DVDs and Blu-rays.
Automatically adjusts the brightness of the screen depending on ambient light within the room.
When set to [On], the brightness of the screen is adjusted automatically according to the room
brightness.
NOTEE:
When set to [ON], [Backlight / Brightness] cannot be changed.
Changes the colors of the image and the saturation to create a more colorful image.
When the monitor detects an HDR signal, you can select preferred gamma correction from
[Low], [Mid] and [High].
Adjusts the brightness of the image using the backlight.
Press the t and u the buttons to adjust the brightness. In general, use this function to adjust
the brightness.
NOTEE:
When [On] is selected in [Ambient Light Sensing], this function cannot be
changed.
Adjusts the image brightness in relationship to the input signal. Press t or u button to adjust.
Adjusts the black luminance.
Adjusts the crispness of the image. Press t or u button to adjust.
NOTEE:
The lines may appear as double lines depending on the setting. In such a case,
lower the sharpness setting.
Adjusts the color density of the screen.
Press the u button to increase the density, or the t button to decrease it.
Adjusts the color tint of the monitor screen between R0-R50 and G0-G50.
Returns all settings in the Video menu to their default values.
English - 71
Advertisement
Table of Contents
