Selecting Or Changing The Startup Device Sequence; Exiting From The Setup Utility Program - Lenovo ThinkCentre A62 3656 User Manual

Selecting or changing the startup device sequence

To view or permanently change the configured startup device sequence, do the
following:
1. Start the Setup Utility program (see "Starting the Setup Utility program" on
2. Select Startup and read the information displayed on the right side of the
3. Select the devices for the Primary Boot Sequence, the Automatic Boot Sequence,
4. From the Setup Utility menu, select Exit → Save Changes and Exit.
If you have changed these settings and want to return to the default settings, select
Load Optimal Defaults on the Exit menu.

Exiting from the Setup Utility program

After you finish viewing or changing settings, press Esc to return to the Setup
Utility program menu (you might have to press Esc several times). If you want to
save the new settings, select Save Changes and Exit. Otherwise, your changes will
not be saved.
54
User Guide
page 51).
screen.
and the Error Boot Sequence.