3. Locate the battery. See Figure 3 on page 10.
4. Remove the failing battery.
Figure 29. Removing the failing battery
5. Install a new battery.
Figure 30. Installing a new battery
6. Reinstall the computer cover, and connect the cables. See "Completing the parts
7. Turn on the computer and all attached devices.
8. Use the Setup Utility program to set the date, time, and any passwords. See
replacement" on page 37.
Note: When the computer is turned on for the first time after replacing the
battery, an error message might be displayed. This is normal after
replacing the battery.
Chapter 4, "Using the Setup Utility," on page 51.
Chapter 2. Installing options and replacing hardware
31