Page 1
™ OWNERS MANUAL Model No. 45-02881 175 LB. POLY PRO DROP SPREADER CAUTION: Read Rules for Safe Operation and Instructions Carefully • Safety • Assembly • Operation • Maintenance • Parts the fastest way to purchase parts www.speedepart.com PRINTED IN U.S.A.
RULES FOR SAFE OPERATIONS Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times, when using power equipment. • Read this owner's manual before attempting to assemble or operate the spreader.
ASSEMBLY TOOLS REQUIRED FOR ASSEMBLY (2) 7/16" Wrenches (2) 9/16" Wrenches 1. Remove the hardware pack and all individual parts from the carton and lay out as shown on page 2 and 3. 2. Assemble the tongue to the hopper as shown in fi gure 1 using two 1/4"...
Page 5
8. Assemble one end of a tongue brace to the side of the tongue using two 1/4" x 5/8" hex bolts and 1/4" hex nuts. Do not tighten yet. See fi gure 4. 9. Assemble the other end of the tongue brace to the triangular plate on the end of the spreader.
OPERATION HOW TO USE YOUR SPREADER 1. Refer to the instruction label on the material package and to the instruction decal on your spreader to help determine the proper spreader setting and application rate. Also see the Setting Chart on this page for a general range of settings for commonly used materials.
Page 7
REPAIR PARTS FOR 175 LB. DROP SPREADER MODEL 45-02881 REF. REF. REF. REF. PART PART PART PART QTY. QTY. QTY. QTY. DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION 47451 47451 47451 47451 47451 Hopper Hopper Hopper Hopper Hopper 24536 24536 24536 24536 24536...