Front Panel - American Audio MIDILOG 10MXR User Manual And Reference Manual

10MXR CONTROLS AND FUNCTIONS cont.
26 25 24
24. HEADPHONE JACK - This jack is used to connect your headphones to the mixer allowing you to
monitor the cue source. Use headphones only rated at 8 ohms to 32 ohms. Most DJ headphones are
rated at 16 ohm, these are highly recommended. Always be sure the CUE LEVEL VOLUME (6) is set to
minimum before you put the headphones on.
25. REVERSE FUNCTION SWITCH - Both the crossfader and the channel faders will reverse func-
tion when the reverse switch is activated. When reversing the crossfader, channel two of the cross-
fader will control volume output for fader channel one and channel one of the crossfader will control
volume output for channel fader two. When reversing the channel faders, moving the fader in an
upwards direction will decrease channel volume and moving the fader in a downwards direction will
increase channel volume.
26. CROSSFADER CURVE ADJUSTMENT - This rotary knob is used to change the way the cross-
fader will operate. The crossfader can operate in different modes, "NORMAL CURVE", "QUICK CURVE"
or any variation of the two. (Quick Curve usually used for scratching).
American Audio - www.americanaudio.us - 10MXR Instruction Manual Page 14
© ®