Page 1
Scope of Supply/Bill of Material & Mounting Drawings Part Number: R-HM18-27-01-R / R-HM18-27-01-L / R-HM18-27-02-R / R-HM18-27-02-L / R-HM18-28-01-R / R-HM18-28-01-L / R-HM18-28-02-R / R-HM18-28-02-L Part Description: Set Oil Tank – Royal Enfield Himalayan Installation / Parts List / Bill of Material for Mounting...
Insert the M5 Washers and M5 x 25 Screws {(7) & (8)} from the rear side of the Mounting Bracket (1) as Identified by “Red” points in the drawing Copyright By SRC Design and Specification are subjected to change Page 3...
Page 4
Insert the Rubber Pads – 2 off (9) as a padding to the bottom side of the bracket and this will ensure it is not fouling / scoring / or damaging the Motorbike bracket. Copyright By SRC Design and Specification are subjected to change...
Page 5
Mounting Bracket Sub- Assembly, as shown and once the position is Oriented to the wedge and can be tightened, butting against the Counter bore face of the Oil tank. Copyright By SRC Design and Specification are subjected to change Page 5...
15 litres) to carry additional 3/5 Litres, which comes in handy, during a long haul. It is made out of Non- explosive plastic and SRC’s scope covers the mounting bracketry to hold this fuel tank. It can be fitted on the LH Side or RH Side and it is left to the discretion of the customer. The Motorbike has provision to mount bracketry to carry additional Oil tank, in which case it has to be fitted to the opposite side to ensure payload symmetry.
This manual is also suitable for:
R-hm18-27-01-lR-hm18-27-02-rR-hm18-27-02-lR-hm18-28-01-rR-hm18-28-01-lR-hm18-28-02-r...
Show all