Connecting To Other Equipment; Connecting To A Pc - Leica V-LUX 1 Instructions Manual

Connecting to other equipment

Connecting to other equipment

Connecting to a PC

You can transfer recorded pictures to a PC
by connecting the camera and the PC.
The software [Photoshop Elements 4.0
(Win)/3.0 (Mac)] in the CD-ROM (supplied)
allows you to easily transfer pictures
recorded with the camera to a PC, print
them and send them by e-mail.
If you use "Windows 98/98SE", install
the USB driver and then connect it to
the computer.
REMOTE
AV OUT/
DIGIT AL
DC IN 8.4V
: USB connection cable (supplied)
: AC adaptor (ACA-DC5; optional)
• Use a battery with sufficient battery power
or the AC adaptor (ACA-DC5; optional).
• Turn the camera off before inserting or
removing the cable for the AC adaptor
(ACA-DC5; optional).
112
1 Turn on the camera and the PC.
2 Connect the camera to a PC via
the USB connection cable
(supplied).
• Connect the USB connection cable with
the [ ] mark facing the [ ] mark on
the [DIGITAL] socket.
• Hold the USB connection cable at
and insert straight in or take straight
out. (If you forcibly insert the USB
connection cable at a slant or upside
down you can deform the connection
terminals and damage the camera or
the connected equipment.)
ACCESS
: This message appears during data
transfer.
3 Press
to select [PC] and then
press [MENU/SET].
USB MODE
PLEASE SELECT
THE USB MODE
PC
PictBridge(PTP)
SELECT
• If you set [USB MODE] in the [SETUP]
menu to [PC] in advance, it is not
necessary to set this every time you
connect to a PC. (P30)
• If you set [USB MODE] to [PictBridge
(PTP)] and then connect the camera to
the PC, messages may appear on the
screen of the PC.
Select [Cancel] to close the messages
and disconnect the camera from the
PC. Set [USB MODE] to [PC] again.
MENU
SET
MENU
SET