Z-Wave LinkedGo ST1000EZ0 Manual page 2

○
Running Status: Fan Speed, Mode, Alarm.
1
○
Z-Wave Local network signal.
2
○
If you set thermostat as a master, you can see the switch. Use it close all A/C.
3
○
Slide indicator
4
○
Increase setting temperature. Hold 5 seconds for Add thermostat into
5
Gateway.
○
ON/OFF button, or back to homepage.
6
○
Decrease setting temperature. Hold 5 seconds for Delete thermostat from
7
Gateway.
○
Room temperature setting.
8
Note: The default version is Chinese. Go to page 3 and click the Setting, then
enter the password "111220" to switch to the English version.
2