Table of Contents
Advertisement
1.4. Contents of the package
Atacama heating unit
Assembly console
Assembly accessories – screw M6x20
Quick manual + Safety Data Sheet
Name plate
1.5. Before start of installation
-
Before starting the installation, we recommend that you attach the serial nameplate (normally
delivered with the unit in its package) to the operational documentation (e.g.: equipment operating book,
etc.), which is subsequently kept for a later maintenance record and the respective servicing.
-
Before starting all installation or maintenance work, it is necessary to switch off the power supply
and secure the switch against switching it on again.
2. Technical parameters
2.1. Atacama heating unit design
EXHAUST COVER
EXHAUST COVER
2.1.1.
It forms a sheet metal casing of the unit and also contains turning lamellas to direct the air blowing out of the
unit, as required by the user. The cover is in RAL 7016 colour.
WATER EXCHANGER
2.1.2.
Maximum permissible temperature/pressure of heating medium is 120°C / 1.6MPa. The exchanger consists of
an aluminium - copper structure that is protected by powder coating RAL 9005. The connection to the water
exchanger is solved by connecting collectors with mail thread ¾". The exchanger is equipped with a venting
valve on both collectors.
FAN
2.1.3.
The maximum operating temperature of the fan motor is + 60°C, operating humidity 0-90% non-condensing,
protection class IP54 and IP44 according to the selected unit type, motor insulation class B. The fan fan and its
board are treated with powder coating RAL 9005.
CONSOLE
2.1.4.
Standard part of the delivery. Steel sheet structure with thickness of 3 mm, treated against corrosion with RAL
9005.
Verze 1 – GBR (11.3.2020)
1x
1x
1x
1x
WATER EXCHANGER
5
4x
FAN
CONSOLE
D-502-0165
Advertisement
Table of Contents
