Connection To The Mains - Xvent Atacama 2 Instruction Manual

3.6.4. Connection to the mains

Connection to the mains is recommended by means of the wiring box with the corresponding electrical
-
protection class (according to the installation space).
- The electric installation box must be attached to a solid non-combustible surface at the maximum distance
from the unit according to length of the motor cables.
- Table of cable lengths on the unit
- In the wiring box, connect the unit cable with cable from the mains
3.6.5. Display of electrical parameters on the unit
Verze 1 – GBR (11.3.2020)
14
D-502-0165