3.7. Direction lamellas setting
Adjust the exhaust lamellas by deflecting them from the front exhaust cover.
-
The minimum lamellas deflection for a correct function of the unit is from 45°, which allows ideal direction
-
of the blown air into the heated space.
The lamellas must always be opened during operation of the unit
-
4. Regulation
4.1. General Information –Safety
The electrical connections of the control elements may only be performed by persons qualified for this
-
activity with the applicable authorization and knowledge of the relevant standards and directives. Before
starting any assembly work, it is necessary to switch off the power supply. During installation, the switch
must be secured against being switched on again by an unauthorized person.
Before starting the installation of the control elements and connecting the installation, it is necessary to
-
familiarize yourself with the original documentation of the individual elements.
4.2. Control elements
Verze 1 – GBR (11.3.2020)
Gradually flex the lamellas from top to bottom
15
D-502-0165