Table of Contents
Advertisement
Available languages
Available languages
SERVICE SCHEDULE
Operation
Engine (see Engine Manual)
Remove excess crop gathered on
the mower.
Remove excess crop gathered on
the rotor.
Check visually to ensure nothing
is loose.
Grease the height adjuster.
Grease the anti-scalping roller.
Grease the rotor bearings.
Check tire pressures.
Check the drive belts.
Check the rotor bearings.
Check the wheel bearings.
Oil the ball coupling.
Check the swivel hitch bush
wear.
Check that all fasteners are tight
and intact.
Check that the safety decals are
intact.
Check that the safety guards are
intact.
Check the knives
wear/condition.
Check metal fatigue.
Check the clutch wear/function.
Engine
Refer to the Engine Manual for servicing and maintenance of the engine.
Removal of crop build-up
Remove all crop deposits from the mower and engine. Build-up of crop deposits may
result in heat build and fires.
1. Disconnect the spark plug wire.
2. Remove any crop that is wrapped around the rotor or on the underside of the mow-
er.
3. Raise the mower to its max. height to access the rotor shaft.
Visual inspection
Perform a visual inspection around the mower for missing, loose, damaged or worn
components. All faults must be either repaired or replaced.
Tyre pressures
DO NOT exceed recommended tire pressures.
22×11.00
-8
16.5×6.50 -8
Service interval
Hourly
Daily
X
X
X
X
X
X
X
X
X
X
0.5–0.7 bar
1.9 bar
Weekly
Seasonal
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Advertisement
Table of Contents
