Appendix F: Compatible Software Products - SBIG STF Series User Manual

Appendix F: Compatible software products

MaxIm LT
MaxIm LT is a limited version of MaxIm DL, and is specifically for controlling
SBIG STF, STXL, STX, and Aluma cameras. The program operates on Windows
computers only. Refer to the Windows Installation section in this guide for
details installation.
The program is supplied on the USB flash drive included with your camera.
A license is available at no cost to the original owner of the camera for any
purchase made after October 01, 2019. Owners of cameras that were
purchased previously may buy a license for a discounted price of $99 USD.
MaxIm DL
MaxIm DL is a full-featured camera control and image processing program
available from Diffraction Limited. It can control all SBIG camera models and a
wide variety third-party cameras. For product details, refer to the Software
page of the Diffraction Limited web site at:
http://diffractionlimited.com/products/software-products/
CCDOPS
The CCDOPS program and user manual are available for controlling older
SBIG cameras. These can be freely downloaded from the Legacy Product
Support page of the Diffraction Limited web site at:
http://diffractionlimited.com/support/sbig-archives/
SBIG STF SERIES - CAMERA USER'S MANUAL
54