Resuming The Programme When The Programme Status Is Rinse Hold; Unloading The Laundry; Switching Off The Appli- Ance; Childproof Lock - Siemens WU14UT70 User Manual

Table of Contents

Advertisement

en Childproof lock
13.13 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
→ "Buttons", Page 23
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the Schleudern programme or
1.
a programme for draining the wa-
ter.
→ "Programmes", Page 24
Press Start/Nachlegen.
2.
13.14 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.15 Switching off the appli-
ance
Turn the programme selector to
1.
Aus  .
Wipe the rubber gasket dry and re-
2.
move any foreign objects.
Leave the appliance door and de-
3.
tergent drawer open so that resid-
ual water can evaporate.
32
14 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press and hold the two
buttons for approx. 3 seconds.
a The display shows
a The control elements are locked.
a The childproof lock remains active
even after the appliance has been
switched off and in the event of a
power cut.
14.2 Deactivating the child-
proof lock
Requirement: To deactivate the
childproof lock, the appliance must
be switched on.
Press and hold the two
buttons for approx. 3 seconds.
goes out in the display.
a
⁠   3 Sek.
.
⁠   3 Sek.

Advertisement

Table of Contents
loading

Table of Contents