Table of Contents
Advertisement
en Troubleshooting
Fault
"E:35 / -10"
Voltage under-usage
symbol (double point).
lights up.
lights up.
flashes.
All other error codes.
"E:30/-20"
The appliance is not
working.
40
Cause and troubleshooting
Call the after-sales service.
▶
→ "Customer Service", Page 48
The automatic voltage control system detects an un-
authorised voltage under-usage.
No remedial action possible.
▶
Note: If the power supply is stable, the programme
continues to run as normal.
Voltage under-usage may cause extension of a pro-
gramme.
No remedial action possible.
Voltage under-usage may cause extension of a pro-
gramme.
No remedial action possible.
The temperature is too high.
Wait until the temperature has dropped.
▶
→ "Cancelling the programme", Page 31
▶
Water level is too high.
Select a suitable programme for draining.
▶
→ "Programmes", Page 24
Door is not closed.
Close the door.
▶
Laundry is caught in the door.
Remove any trapped laundry.
▶
Malfunction
Call the after-sales service.
▶
→ "Customer Service", Page 48
Solenoid valve defective.
Call the after-sales service.
▶
→ "Customer Service", Page 48
Detergent dosage is too high.
Reduce the amount of detergent for the next wash-
▶
ing cycle with the same load.
Additional water is added.
Do not add any extra water to the appliance while it
▶
is operating.
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
▶
Advertisement
Table of Contents
