Advertisement
Camera Installation
•
1. Attach the camera to a tripod (highly recommended).
NOTE:
If using the camera hand held, minimize camera movement when taking a
measurement. Note that using the camera hand held will not be as accurate as
using it on a tripod.
NOTE:
This camera can be mounted on a tripod without an adapter. Hikvision offers a
tripod for additional purchase. As suppliers have not fully restored production
capacity recently, there are multiple suppliers, and there may be slight
differences of the same model, which will not affect use. If you are concerned
about this, you can locally purchase any tripod that meets the standards.
2. Set the camera in front of the one-direction path so that it can capture the full faces of
passing people, as shown below.
3. Set installation height between 4' 11" and 5' 7" (1.5 m and 1.7 m), at the same height as
human faces (or at a low elevation angle to reduce error by heat sources near the ground).
4. Set the distance between the camera and object as follows:
DS-2TP31B-3AUF: Set at 3' 4" (1 m)
•
DS-2TP21B-6AVFW: Set between 3' 4" and 6' 7" (1 m and 2 m)
•
NOTE:
Avoid placing any object in the camera view's background with a temperature
higher than a human body's.
© 2020 Hikvision USA Inc. • All Rights Reserved • Specifications subject to change without notice.
Hikvision USA Inc., 18639 Railroad Street, City of Industry, CA 91748, USA • Hikvision Canada, 4848 rue Levy, St-Laurent, Quebec, Canada, H4R 2P1
Tel: +1-909-895-0400 • Toll Free in USA: +1-866-200-6690 • E-Mail: sales.usa@hikvision.com •
www.hikvision.com
052620NA
2
Advertisement
