Table of Contents
Advertisement
MoniMax7600
Precautions
MX7600 has system battery back up units as optional itself to grantee customers transaction
safety when losing power status. This function will proceeding automatic safe shut down either.
But we are recommending to use UPS system for power sourcing to ATM.
This is basic requirements before turn on the system.
● Check the OUTPUT voltage of power source before inserting ATM power cable into it.
● Dispatch all the unit holder tapes and a desiccant pack form ATM
● This machine should be connected to a dedicated power circuit.
This circuit must consist of LINE, NEUTRAL and GROUND leads connected directly to the power
circuit breaker panel. This circuit cannot be shared with any other equipment.
● Make sure that the outlet of power at installation site should be grounded by using of meter.
It is ok that the voltage measurement between mutual and ground lead in outlet is less than 5.0V
● You can find out that there are 2 types of cables outside the safe door.
- Main Power Supply Cable
- Communication cable.
● Connect power cables and communication cable properly.
15
Installation Manual
Advertisement
Table of Contents
