Technical Specifications - zapco ST-X DSP Owner's Manual

Technical Specifications

ST-4X DSP
Power @ 4Ω: 4 x 65 watts
THD @ Rated Power < 0.5% THD
Power @ 2Ω: 4 x 95 watts
Power Bridged @ 4Ω: 2 x 190W RMS
Signal to Noise Ratio > 90dB
THD + Noise < 0.2%
Channel Separation > 60dB
Frequency Response 15Hz to 30KHz ±1dB
Dimensions in mm: 160(W) x 52(H) x 282(L)
Overall: 160(W) x 52(H) x 320(L)
ST-6X DSP
Power @ 4Ω: 6 x 100 watts
THD @ Rated Power < 0.5% THD
Power @ 2Ω: 6 x 150 watts
Power Bridged @ 4Ω: 3 x 300W RMS
Signal to Noise Ratio > 90dB
THD + Noise < 0.2%
Channel Separation > 60dB
Frequency Response 15Hz to 30KHz ±1dB
Dimensions in mm: 160(W) x 52(H) x 452(L)
Overall: 160(W) x 52(H) x 488(L)
26