Triumph Scrambler 1200 XC Owner's Handbook Manual page 75

ABS Enable
If the ABS has been disabled when
riding in a particular riding mode, it
can enabled again with the motorcycle
stationary or moving.
To enable the ABS system when the
motorcycle is stationary, do one of the
following:
• Turn the ignition OFF and then ON.
• With the ignition ON, press and hold
the MODE button for more than one
second.
The ABS will be enabled when the
motorcycle reaches a speed exceeding
6 mph (10 km/h). The ABS warning light
will turn off.
To enable the ABS system when the
motorcycle is moving, do the following:
• Press and hold the MODE button for
more than one second.
General Information
Warning
If the ABS is enabled during a
braking maneuver by pressing the
MODE button, the ABS will become
operational. Enabling the ABS during
a braking maneuver may change
the handling characteristics and the
stability of the motorcycle.
Changes to
characteristics of
during a braking maneuver may result
in loss of motorcycle control and an
accident.
After riding with the ABS disabled,
always make sure that the ABS is
enabled before returning to ride on
public roads.
Riding with the ABS disabled will, if
braking too hard, cause the wheels
to lock resulting in loss of motorcycle
control and an accident.
the handling
the motorcycle
75