Handlebars - Triumph Scrambler 1200 XC Owner's Handbook Manual

Handlebars

Warning
It is recommended to have handlebar
adjustments carried out by a trained
technician of an authorized Triumph
dealer.
Handlebar adjustments
out by a technician who is not of
an authorized Triumph dealer may
affect the handling, stability or other
aspects of the motorcycle's operation
which may result in loss of motorcycle
control and an accident.
Warning
Make sure the motorcycle is stabilized
and adequately supported.
A correctly supported motorcycle will
help prevent it from falling.
An unstable motorcycle
causing injury to the operator or
damage to the motorcycle.
Note
This procedure assumes the handlebars
are in the standard
delivered from the factory.
If the handlebars have already been
adjusted as described below, then rotate
the handlebars risers through 180° to
return the handlebars to the standard
position.
The handlebars are adjustable for reach
by approximately 0.79 in (20 mm). This
is achieved by rotating the handlebars
risers.
Maintenance and Adjustment
To adjust the handlebars:
•
carried
1.
2.
•
•
Note
may fall, Scrambler 1200 Steve McQueen Edition
and Scrambler 1200 XE - Spacers are
supplied to adjust the height of the
handlebars. The spacers are located
under the handlebars risers. Remove
the handlebars risers. Add or remove
the spacers depending on the required
height needed. Reinstall the handlebars
position, as
risers and tighten the handlebars riser
bolts to 28 lbf ft (38 Nm).
•
Loosen and remove the handlebars
upper clamp bolts.
1
2
Front upper clamp bolts
Rear upper clamp bolts
Remove the upper clamp.
Lift the handlebars out of the
handlebars risers and support with
the aid of an assistant.
Rotate both risers through 180° and
align the bolt holes.
139